Status - showcase

Showcase Status - Showcase from Mdd

The Status display case from MDD provides a stage for awards, important books, documents, and company gadgets. Behind tempered glass fronts, they stand protected yet clearly visible; the anthracitetfaThe beechwood body provides a calm frame.

design & material

The cabinet body is made of 18 mm melamine board in anthracite-154, the sides of 28 mm, and the top panel of 12 mm. ABS edging (2 mm) neatly finishes the edges. The 5 mm clear tempered glass door showcases the contents, while aluminum handles and a shadow gap in semi-matte anthracite-M154 add subtle accents. Hinges with a 110° opening angle allow the front to open wide.

Variants & series

You choose between two widths and two heights; the depth remains the same. The lower height leaves wall space above for a picture, while the taller height utilizes the room's height for more display space. The display case is available fully glazed or with a front made of glass and wood veneer. A rod lock is optional and increases the security of the contents.

Mission & combination

GedaThis is the display case for executive offices and prestigious office spaces. Place awards at eye level, books and folders underneath, and deliberately leave some compartments empty – this creates a calming effect. The [description of the display case] goes well with this. Status - Shelf from the same series; you can find more on the Series page status or in the Collection Display Case.

• Widths: 1032 or 2008 mm, Heights: 1167 or 1871 mm, Depth: 421 mm
• Melamine board, 5 mm clear tempered glass, aluminum handles
• Optional rod lock
• Standards: PN-EN 527-2:2017-02, PN-EN 14073-2:2006
• Made in Poland, in the European Union

• Oberplatte - Melaminplatte 12 mm, Umleimer ABS 2 mm;
• Seiten - Melaminplatte 28 mm, Umleimer ABS 2 mm;
• Melaminsockel - 18 mm, Umleimer ABS 2 mm;
• Glastür - Klarhartglas 5 mm, Typ float;
• Front - Melaminplatte 18 mm, Umleimer ABS 2 mm, Scharnier 110°;
• Korpus - Melaminplatte 18 mm, in Anthrazit-154;
• Griffe – Aluminium;
• Schattenfuge - in Anthrazit halbmatt-M154;
• Möglichkeit der Kantenverleimung mittels Lasertechnik oder PUR-Klebstoff - wenden Sie sich bitte an den Kundendienst, wenn die Ausschreibungs- oder Projektanforderungen eine Laser-Kantenverleimung erfordern;
• Hergestellt in Polen, in der Europäischen Union

• Einhaltung der Normen: PN-EN 527-2: 2017-02 PN-EN 14073-2: 2006;
• Zwei Höhen zur Auswahl: 1167 mm und 1871 mm;
• Erhältlich in zwei Breiten: 1032 mm und 2008 mm;
• Hergestellt aus MFC-Platte und gehärtetem Glas;
• Optionales Stangenschloss;
• Konzipiert für Chefbüros und repräsentative Büroräume

Sicherheits- und Pflegehinweise

Es gelten die normalen Rückgabebestimmungen gemäss den Allgemeinen Geschäftsbedingungen (AGB) der Kaqtu Design AG.